Danfoss ICMTS Motor Operated Valves

Danfoss ICMTS is a motor operated valve driven by actuator type ICAD 600A-TS. ICMTS is designed to regulate the flow of transcritical gas or subcritical liquid from the gas cooler in transcritical CO₂ systems. ICMTS can also be used for other control functions in CO₂ systems. ICMTS is designed so that the opening and closing forces are balanced.

Danfoss KVC Hot Gas Bypass Regulator

Danfoss KVC hot gas bypass regulators are used to adapt compressor capacity to actual evaporator load by supplying a replacement capacity in the form of hot/cool gas. They are installed in a bypass line between the high and low-pressure sides of the refrigeration system and are designed for direct gas injection into the suction line.

Danfoss KVL Crankcase Pressure Regulator

Danfoss KVL crankcase pressure regulators are installed in the suction line of refrigeration systems. They are used to protect the compressor motor against overload experienced during startup after long off periods or just after defrost periods. Danfoss Crankcase pressure regulator type KVL is in the suction line ahead of the compressor.

Danfoss KVS Electric Regulating Valve

Danfoss KVS is a series of electric suction modulating valves for AC transport and refrigeration applications. Accurate temperature or pressure control is obtained by modulating the refrigerant flow in the evaporator with a current or voltage driver.KVS is a series of electronic suction modulating valves for AC transport and refrigeration applications.

Danfoss Regulating REG-SA and REG-SB

Danfoss series of regulating valves REG, are for industrial refrigeration systems and are based on the modular SVL platform. Available as REG-SA for expansion lines and REG-SB valves for e.g. liquid lines. Stainless steel versions are available as REG-SA SS and REG-SB SS. REG-SA and REG-SB are angleway and straightway hand operated regulating valves, which act as normal shut-of valves in closed position.

Danfoss Regulating REG-SA SS and REG-SB SS

Danfoss REG-SA SS and REG-SB SS are angle-way and straight-way hand-operated regulating valves, which act as normal stop valves in closed position. The stainless steel REG-SA SS and REG-SB SS are angleway and straightway hand-operated regulating valves, which act as normal shut-off valves in closed position.

Danfoss Pressure Operated Water Valve

Danfoss Pressure operated water valves types WVFX and WVS are used for regulating the flow of water in refrigeration plants with water-cooled condensers. The pressure operated water valves give modulating regulation of the condensing pressure within defined limits during operation.

Danfoss AKV Electric Expansion Valves

Danfoss AKV are electrically operated expansion valves designed for refrigerating plants. The AKV valves are normally controlled by a controller from Danfoss range of ADAP- KOOL® controllers. For robust, efficient, and responsive control, Danfoss world-renowned, ADAP Kool® expansion valves, AKV, cover applications ranging from lower capacity commercial.

Danfoss CCMT Electric Regulating Valves

Danfoss CCMT is a highly reliable electric pressure regulating valve optimized for transcritical CO₂ refrigeration. The valve has versatile applications in the transcritical system. First, the valve is capable of high pressure gas cooler control (transcritical). Second, the CCMT can be used as gas by-pass valve (medium pressure control).

Danfoss ETS Electric Expansion Valves

Danfoss ETS is a series of electric expansion valves for precise liquid injection in evaporators for air conditioning and refrigeration applications. The valve piston and linear positioning design is fully balanced, providing bi-flow feature as well as solenoid tight shut-off function in both flow directions. ETS valves are compatible with electronic control solutions from Danfoss and other manufacturers.

Danfoss CTM Multi Ejector Solution

Danfoss Multi Ejector Solution, consists of a CTM 6 High Pressure valve and an AK-PC 782A controller. This solution makes CO2 refrigeration systems economically competitive with the HFC systems at all ambient temperatures by improving COP in comparison to standard parallel compressor systems.

Danfoss TD 1 TDE 1 Thermostatic Expansion

Danfoss TD 1 / TDE 1 is a thermostatic expansion valve designed to regulate refrigerant injection into evaporators. The injection depends on the refrigerant superheat at the evaporator outlet, where the bulb must be placed. Danfoss TD 1 / TDE 1 is constructed for hermetic sealed systems and supplied as angleway and straightway version.